Datasheet
3D Models
Specifications
Electrical specifications at 25°C.
| Part number 1 | Lines |
Common mode peak impedance (Ω) |
Cutoff frequency (MHz) |
Inductance min (µH) 3 |
Irms (mA) | DCR max (mΩ) |
Isolation Voltage (Vrms) |
|---|---|---|---|---|---|---|---|
| ST515FRD5353LZ | 3 | 910 @ 210 MHz | 1100 | 5 | 500 | 200 | 300 |
Notes
- When ordering, please specify termination code: e.g. ST515FRD5352LZ.
- Current rating is for each line.
- Inductance is per winding, tested at 1 MHz.
Termination:
- L = RoHS compliant tin-silver-copper over tin over nickel over phos bronze.
- S = non-RoHS tin-lead (63/37). (Special order, added cost)
Environmental
Ambient temperature range:
–40°C to +85°C.
Storage temperature range:
Component: –55°C to +85°C.
Tape and reel packaging: –40°C to +80°C.
Tape and reel packaging: –40°C to +80°C.
Failures in Time (FIT) / Mean Time Between Failures (MTBF):
Performance curves
Typical Response
Schematics
General specification
Core Material:
Ferrite
Weight:
183 – 201 mg
Packaging:
500/7″reel Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth.
Soldering/Washing
Moisture Sensitivity Level (MSL):
1 (unlimited floor life at <30°C / 85% relative humidity).
Resistance to soldering heat:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
Refer to Soldering Coilcraft Components before soldering.